Free Shipping on Every In-Stock Order in the USA!

How to load and print your Dymo compatible labels

Your quick step by step guide to printing with your Dymo LabelWriter printer on both Dymo labels and compatible custom labels.

1. Remove the label spool from inside the cover and separate the spool guide from the spindle.

2. Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool.

3. Slide the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool.

4. Insert the label spool into the slot in the printer cover with the labels coming out from underneath the roll.

5. Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot. The printer automatically feeds the labels, stopping at the beginning of the first label. If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed button. If the first label on the roll is not a full label, press the form-feed button to eject the partial label.

6. (450, 450 Turbo, Duo, and Twin Turbo Only) Slide the label guide to the left until the label guide aligns with the right edge of the label. Make sure that the label guide does not pinch the label.

7. (Twin Turbo Only) Repeat steps 3-8 to load a second roll of labels.

8. Carefully lower the top cover. 

9. Open your Dymo Software Printing Program.

10. Select your type of label and the dimensions from the left toolbar. 

11. Drag and drop the text or other elements you would like to print.

12. Input your text or data.

13. Print!

 

 

1